Mitsubishi Evo Engine

Evo 4-9 ARP Head Studs

These ARP cylinder head studs are made from 8740 chrome moly steel and have a 190,000 psi tensile strength rating. They are precision centerless ground and thread-rolled to Mil-S-8879 specs, with a black oxide finish for corrosion resistance. The kits come complete with hardened washers and high-strength nuts.

They provide uniform clamping to maintain vital head to block sealing that is required in high HP applications

£115 + VAT

Evo 1-9 ARP Main Studs

These ARP main studs are made from 8740 chrome moly steel and have a 190,000 psi tensile strength rating. They are precision centerless ground and thread-rolled to Mil-S-8879 specs, with a black oxide finish for corrosion resistance. The kits come complete with hardened washers and high-strength nuts.

£95 + VAT

 

Evo 4-8 Kelford 272 Cams

272 Duration 11.00mm Lift. The best all round performance cam to suit 400-600HP racing engines

£550 + VAT

Evo 4-8 Kelford 264 Cams

264/260 Duration, 11.00/10.35mm Lift. The ultimate cam for street, strip and track engines from 300-500HP

£550 + VAT

Evo 1-9 Adjustable Cam Pulleys

  • Supplied as a pair
  • Adjustable vernier cam pulleys
  • Required when fitting any aftermarket cams to allow the correct cam timing to be setup
  • Cam Gears are CNC-machined from AL7075-T6 billet aluminum
  • The 5-bolt design eliminates any chance of slippage
  • Only one pulley is required for Evo 9 exhaust cam

£110 + VAT

Evo 9 NGK ILFR7H

Supplied as a set of four. NGK ILFR7H spark plugs Direct replacement plug for the Evo 9

We have used these plugs in 550HP engines with good results

£38 + VAT

Evo 1-8 NGK BPR7EIX Spark Plugs

Supplied as a set of four NGK BPR7EIX Iridium spark plugs. This heat range is a direct replacement for Mitsubishi’s OEM plug. Suitable for engine’s up to 450HP

£25 + VAT

Evo 1-8 NGK BPR8EIX Spark Plugs

Supplied as a set of four NGK BPR8EIX Iridium spark plugs. This heat range is a cooler running plug than the 7 heat range plug and can be used as a fast road/ track plug.
Suitable for engine’s up to 500HP

£25 + VAT

Evo 1-8 NGK BPR9EIX Spark Plugs

Supplied as a set of four NGK BPR9EIX Iridium spark plugs. This heat range is a cold running plug and can be used for road or track in big HP cars, will also suit lower powerd cars that are used on track a lot. Suitable for engine’s over 500HP

£25 + VAT

Evo 1-9 Cambelt

Dayco cambelt to fit Mitsubishi Evo 1-9

£25 + VAT

Evo 1-9 Balance Belt

Dayco balance shaft belt to fit Mitsubishi Evo 1-9

£15 + VAT

Balance Shaft Eliminator Kit

 

  • Genuine Mitsubishi balance shaft eliminator kit
  • We always recommend removal of the factory balance shaft’s when forging the engine
  • Reduces the risk of balance belt failure resulting in engine damage
  • Required when stroking the engine due to the extra throw of the crankshaft

£60 + VAT

Evo 4-9 K&N Induction Kit

Cold air induction kit to fit Evo’s 4-9 that are still using the OEM MAF sensor

£70 + VAT

Large K&N Air Filter

Large K&N air filter with 4″ intake neck

Suits car’s running no MAF sensor

£45 + VAT

Mitsubishi Evo 1-10 Oil Filter

Genuine Mitsubishi OEM oil filter supplied with sump plug washer.

£10.50 + VAT

Evo 4-9 Exhaust Cam Position Sensor

OEM quality exhaust cam position sensor. These are quite a common failure causing running issues and engine warning lights.

£65 + VAT

Evo 5-9 Front Lambda Sensor

OEM quality front Lambda sensor to suit Evo’s 5-9 Will fit Evo 4 with a small wiring modification.

£85 + VAT

If you require any further information about us or the services and products we offer then, please feel free to contact us.

Menu